2012)

Printable View

Show 40 post(s) from this thread on one page

May 16, 2012, 10:39am
Tuukka

Quote:

There is an accessory that is now blue.

Webstor's rifle ;)

Quote:

We are actively looking into stackable stands maybe as early as 2014.

Noooo.. make it happen on 2013.. we need them sooner, actually allready! Because our collections grows so fast :D
May 16, 2012, 12:39pm
jibernish

Quote:

Originally Posted by markatisu

Its not necessarily a sell out in the same way the others are, they have a LOT of He-Man figures since he is the icon and the starting point for a large number of people. Like vertigoink said if they were to say here is the revised He-Man then He-Man 1.0 would just rot because the "default" would be 2.0.

So until that big production run gets lower to the point where they could probably just give away the figures in a Mad Matty sale or take a loss on them we won't see a revised He-Man.

Not to mention since they can use the same He-Man buck for all his variations we can spend more money on tooling for things like Thunderpunch or say Laser Light as the main He-Man form is already paid for

I wonder how many He-man figures are selling, and why they made so many. Do they have something planned that they think will greatly increase the number of collectors? I'd like to think they had a reason for producing so many, and that it means something good for us.
May 16, 2012, 01:21pm
Dr Kain

Quote:

Originally Posted by Tuukka

Webstor's rifle ;)

Noooo.. make it happen on 2013.. we need them sooner, actually allready! Because our collections grows so fast :D

Meh, by 2014 I will have already found something that works better than figure stands anyway. However, figure stands do not help figures with heavy back pieces and loose ankles. I have a figure stand for every DCU figure, and I still have certain figures that cannot stand properly. Hell, **** Grayson Robin is impossible to stand up without having him backed against something because he always falls backwards after a few days. You either have to constantly fix his pose on a daily basis or put him against the wall or something. Plus, there are characters with holes too big for the stand to stay on their feet, or the peg is too big for the hole and the character floats on the tip of the stand and falls off.
May 16, 2012, 01:30pm
Zodach

Quote:

Originally Posted by Dr Kain

And I would rather someone who actually cared about Voltron got that license.

Voltron just doesn't sell well enough for many other companies to go after the license. Retailers weren't interested in the Voltron Lion Force toys even with a cartoon to back it. I highly doubt Voltron villains or vehicles are popular enough to invest a lot of money into making them.
May 16, 2012, 01:54pm
Dr Kain

Quote:

Originally Posted by Zodach

Voltron just doesn't sell well enough for many other companies to go after the license. Retailers weren't interested in the Voltron Lion Force toys even with a cartoon to back it. I highly doubt Voltron villains or vehicles are popular enough to invest a lot of money into making them.

All they need to do is make the big three, that is it. That is all I am asking. You can't have a Voltron figure line without the trio.

That is like doing a He-Man line without Skeletor, Evil-Lyn, and Beast-Man. A Thundercats line without Mumm-Ra. Batman without Joker. Superman without Lex, Darkseid, and Brainiac. Green Lantern without Sinestro. Transformers without Megatron/Galvatron. Well, okay, the later might work, but the others would not.
May 16, 2012, 02:05pm
MegaGearMax

Quote:

Originally Posted by Dr Kain

All they need to do is make the big three, that is it. That is all I am asking. You can't have a Voltron figure line without the trio.

That is like doing a He-Man line without Skeletor, Evil-Lyn, and Beast-Man. A Thundercats line without Mumm-Ra. Batman without Joker. Superman without Lex, Darkseid, and Brainiac. Green Lantern without Sinestro. Transformers without Megatron/Galvatron. Well, okay, the later might work, but the others would not.

Mattel is kinda screwed the way they went about it. By having lions that could be piloted by 4" figures, they limited every other character. No Vehicle Voltron in the same size, no Robeasts for $80.

I think Voltron is a line where some imagination on the part of the fandom has to take place. Sure they can make the figures for Voltron, but the robot battles can't be in scale with the figures directly. Mattel should have had a scale for the lion/robot battles and a scale for the human conflicts. You go all Human Alliance and can't merge the two.
May 16, 2012, 02:10pm
musclor

Quote:

Originally Posted by Dr Kain

Meh, by 2014 I will have already found something that works better than figure stands anyway. However, figure stands do not help figures with heavy back pieces and loose ankles. I have a figure stand for every DCU figure, and I still have certain figures that cannot stand properly. Hell, **** Grayson Robin is impossible to stand up without having him backed against something because he always falls backwards after a few days. You either have to constantly fix his pose on a daily basis or put him against the wall or something. Plus, there are characters with holes too big for the stand to stay on their feet, or the peg is too big for the hole and the character floats on the tip of the stand and falls off.

There's already something much better than stands - Museum Wax. I use it for all of my toylines and it is absolutely amazing stuff. Can't see it, doesn't harm plastic...
May 16, 2012, 02:14pm
krosfyah

Quote:

Originally Posted by orbles

I took it that they have produced a TON of He-Man figures and therefore would need to sell through those that have been produced before they went back into production.

Quote:

Originally Posted by markatisu

Its not necessarily a sell out in the same way the others are, they have a LOT of He-Man figures since he is the icon and the starting point for a large number of people. Like vertigoink said if they were to say here is the revised He-Man then He-Man 1.0 would just rot because the "default" would be 2.0.

So until that big production run gets lower to the point where they could probably just give away the figures in a Mad Matty sale or take a loss on them we won't see a revised He-Man.

Not to mention since they can use the same He-Man buck for all his variations we can spend more money on tooling for things like Thunderpunch or say Laser Light as the main He-Man form is already paid for

Quote:

Originally Posted by vertigoink

I wouldn't mind Battle Armor Faker armor in blue- poor guy needs some more of his own accessories! Hell, I'd be glad to even have BA Skeletor armor in blue! :sklol:

I'm guessing that to fill the promise of them being "always available" that Mattel must have made A CRAP TON of a production run on him- and were they to release a 2.0 they'd be stuck with a warehouse full of the original.

:hmlol: good points then. I was thinking very close minded (still had the anniversary he-man figure in mind)
May 16, 2012, 02:57pm
Count Marzo

Quote:

Originally Posted by Toyguru

Because things change so much so often that we hate having to give out update after update. We want to make sure something is happening for sure before it is announced (and look at how much still changes!). Look at how most fans see Draego Man's shield or Horde Prime's stick in the mud. Once we show something, fans/customers expect it. We know this. This is why we hold information back until we are sure it is going to happen. Things change so much that we want to show what you are getting, not early prototypes or concepts that won't make it.

And of course their are legal, PR and licensor issues too, but you get the point.

I gotta agree with this even though I know it kinda sucks for us who want to know.

Now where's Draego-Man, Spector, and Horde Prime's weapons at that got cut?! Bring on a "Deluxe Weapons Pak" or something to that effect. ;)
May 16, 2012, 05:58pm
Darth Daddy

Quote:

Originally Posted by zodak74

Fingers crossed for Draego-Man's flame sword done in icy blue to coincide with Frosta's release this fall! :)

I love this idea... very cool suggestion.
May 16, 2012, 08:07pm
BlueStreak

Quote:

Originally Posted by gbagok

Crap. I'd hoped he would not have dinky wings.

Yep - I had the same reaction.
May 18, 2012, 12:28am
Jon-O

Quote:

Originally Posted by MegaGearMax

MOTUClassics.Com Asks: Some collectors that enjoy Vykron are planning to buy multiples and display him as three different characters. As a collector yourself, do you feel that same compulsion? If you do, which one would still be Vykron and what would you name the other two?

Toy Guru: I really never thought of them as separate characters and the bio does an awesome job of explaining all of the different outfits. It really is much more like He-Man. He is still He-Man whether he is in Snake Armor, Thunder Punch or New Adventures.

I think the reason people want to buy three of Vykron is so they can have the other characters he won the armor from in battle... Right? I mean, We do want to give Mattel more money for all the amazing characters in all corners of the lore, right??? :hmgrin:
May 18, 2012, 12:38am
mykan

Quote:

Originally Posted by Jon-O

I think the reason people want to buy three of Vykron is so they can have the other characters he won the armor from in battle... Right? I mean, We do want to give Mattel more money for all the amazing characters in all corners of the lore, right??? :hmgrin:

He's probably coming from the point of view that despite the fact there is one He-Man (Adam), you still have to buy multiple He-Man figures to get the different armors. Thus, it would make sense to buy multiple Vykrons to depict him in his different looks.
May 18, 2012, 07:05am
MoViEfReAk

The blue accessory... just a wild guess... maybe He-Man's shield for Stinkor? There was a yellow border Stinkor in the eighties that came with this shield..
May 18, 2012, 10:51am
Telkan2

Ooh, Evil-Lyn's cape or Teela's shield in blue would be GREATLY appreciated!
May 18, 2012, 11:20am
MegaGearMax

Quote:

Originally Posted by Telkan2

Ooh, Evil-Lyn's cape or Teela's shield in blue would be GREATLY appreciated!

Good thinking about Battleground Evil-Lyn's cape!
May 18, 2012, 01:04pm
Berserker79

Quote:

Originally Posted by MoViEfReAk

The blue accessory... just a wild guess... maybe He-Man's shield for Stinkor? There was a yellow border Stinkor in the eighties that came with this shield..

That would be nice and a total cool vintage variant nostalgic thing...
May 19, 2012, 06:50pm
Mern-Ra

I'm hoping Granymr might have 2 sets of wings; one set cartoon accurate and one set that's more to scale with the figure.

Show 40 post(s) from this thread on one page