Post Your MOTUC Display & Collection Pictures!

**TE-MAN** · July 22, 2009, 03:05am

Originally Posted by musclor

I really like that 'simple' set-up. It is very classy.

Thanks, I try.

Originally Posted by issarged

what is your removing figure from the package procedure?

I slice the bottom three sides of the bubble (all but the side attached to the card) and pull the tray out carefully,

I've been doing this since the begining, I can display them both loose and MOC, this is the answer to the question TO OPEN OR NOT TO OPEN?

**trapXjaw** · July 22, 2009, 05:07am

here´s my motuc-display. made a little throneroom-diorama for my evil warriors!

**Urosinho** · July 22, 2009, 05:33am

Originally Posted by issarged

what is your removing figure from the package procedure?

This is how I do it, with sharp razor, cut the bottom of the box from three sides *1, then pull out the plastic with figure. Then you just fix some dents that may occur with your fingers (from inside the box).
Afterward you should cut upper part of plastic (the one in which figure lays *2).

it is then possible to put the figure inside back without problem.

check the pic:

hope you like this way! regards

**Eamon** · July 22, 2009, 07:11am

Originally Posted by trapXjaw

here´s my motuc-display. made a little throneroom-diorama for my evil warriors!

http://www.planeteternia.de/grafiken...les/132165.jpg
http://www.planeteternia.de/grafiken...les/132145.jpg
http://www.planeteternia.de/grafiken...les/132146.jpg
http://www.planeteternia.de/grafiken...les/132148.jpg
http://www.planeteternia.de/grafiken...les/132149.jpg

This looks wicked!!!
You should post this over in the costumes forum!

**okydoky** · July 22, 2009, 07:39am

Definitely a beautiful diorama TrapXJaw!! You definitely need to post this pic at the "Customs" section. I will stop using the word "definitely" now....

**hhhelmsley** · July 22, 2009, 08:03am

Great job with the pics trapXjaw!!

**warrenpeace2012** · July 22, 2009, 10:29am

Here's my updated Motu collection with new additions, Man at Arms and King Grayskull!

**radrcks** · July 22, 2009, 11:20am

Originally Posted by trapXjaw

here´s my motuc-display. made a little throneroom-diorama for my evil warriors!

That's amazing!!

**GrtEternal** · July 22, 2009, 11:38am

Originally Posted by Sea of sorrow

HEHEHEEH the size of the sword is appropriate for the size of the interdimensional cucumber!!

The sword is really beautiful, I ordered one from spymagician and can't wait it to arrive!!!!

How much does he charge per sword?

**-= SupernovA =-** · July 22, 2009, 11:53am

Originally Posted by TE-MAN

I slice the bottom three sides of the bubble (all but the side attached to the card) and pull the tray out carefully,

I've been doing this since the begining, I can display them both loose and MOC, this is the answer to the question TO OPEN OR NOT TO OPEN?

That's genious! Why didn't I think of that? I've cut them all open from bottom to the sides (halfway), leaving the top part of the bubble attached so the bubble always hangs a bit loose. Really irritates me. Your way is indeed also perfect for displaying MOC. I'm going to start doing that as soon as I receive MAA, so I won't butcher any more cards

Thanks for the tip!

**raptor8x** · July 22, 2009, 04:14pm

Here's a link to my MOTUC displays: http://sites.google.com/site/raptor8...e-display-pics
My favorite is Man-At-Arms in space.

I'll just repost when I have more. Enjoy!

**Eric** · July 22, 2009, 04:38pm

Lookin' good, raptor. I like the Man-At-Arms in space the best, too.

**Alexx** · July 22, 2009, 11:34pm

Having fun with Man-At-Arms time!

Classic style! That was my Man-At-Arms; I lost his armor and mace somewhere along the way, so that's how I remember him the most. Only thing that's missing is a chewed up left hand!

Love that new 200X sword!

**Mike Bock** · July 22, 2009, 11:36pm

Looking at your pics Alexx I so wish MAA had come with the arm cannon.

**Alexx** · July 22, 2009, 11:49pm

Originally Posted by Mike Bock

Looking at your pics Alexx I so wish MAA had come with the arm cannon.

Ended up looking a lot better than I thought it would! Sadly, it was tough to wedge on there, and I don't think I want to do it often lest I warp the armor. If I like it enough, I might file down the area where the arm goes and make it a regular thing for 'em.

You're right, though, it would have been cool to get a brand new one in the MotUC style.

**Mike Bock** · July 22, 2009, 11:53pm

Originally Posted by Alexx

Ended up looking a lot better than I thought it would! Sadly, it was tough to wedge on there, and I don't think I want to do it often lest I warp the armor. If I like it enough, I might file down the area where the arm goes and make it a regular thing for 'em.

You're right, though, it would have been cool to get a brand new one in the MotUC style.

I would've rather have the re-release King Grayskull come with the 200x sword than MAA.
That way MAA could've come with the arm cannon.

I also like how Snake Armor He-Man looks with the MOTUC 200x sword.
Great pics man.

**Eric** · July 23, 2009, 12:09am

Originally Posted by Alexx

Classic style! That was my Man-At-Arms; I lost his armor and mace somewhere along the way, so that's how I remember him the most.

Ha! That's great cause that's exactly how mine was, too.

The arm armor never disappeared, but you can bet the body armor did.

**bcrduke** · July 23, 2009, 12:25am

SERIOUSLY?!?!

I lost the arm and leg armor really soon after I got him

I was REALLY young, so keeping things together was a little difficult, but I pretty good at keeping track. I think my crazy father probably threw a lot of stuff like that away if it was randomly on the floor somewhere.

**TE-MAN** · July 23, 2009, 02:12am

Originally Posted by -= SupernovA =-

That's genious! Why didn't I think of that? I've cut them all open from bottom to the sides (halfway), leaving the top part of the bubble attached so the bubble always hangs a bit loose. Really irritates me. Your way is indeed also perfect for displaying MOC. I'm going to start doing that as soon as I receive MAA, so I won't butcher any more cards

Thanks for the tip!

No problem, glad I could help.

**austin81** · July 25, 2009, 06:38am

thanks fot the pics guys!!

**He-Man123** · July 25, 2009, 06:10pm

My redone display including the new place holders.

**Dayton72** · July 26, 2009, 11:07am

Took this shot and it turned out pretty cool. Also been working on illustrations of each character - Merman turned out good so far...

**Eamon** · July 26, 2009, 11:13am

Originally Posted by Dayton72

Took this shot and it turned out pretty cool. Also been working on illustrations of each character - Merman turned out good so far...

You should be posting post this over in the Farnart boards?

**Dayton72** · July 26, 2009, 11:17am

Originally Posted by Eamon

You should be posting post this over in the Farnart boards?

Yeah - probably. I started taking display pics but they weren't cooperating this morning...so I started taking pics of other stuff I want to add to the display.

Very nice illustrations by the way - I went to art school myself - illustration major - just ended up doing web design instead

**Poe Ghostal** · July 28, 2009, 08:21am

Thread: Post Your MOTUC Display & Collection Pictures!

Thread Tools

Search Thread

Display

Posting Permissions