Original MOTU MOC Clamshell cases available at Zoloworld.com

[Warrior Knight]

Hello Everyone,

The wait is over for the pre-orders. They are available on the site under the protective case section. The result is incredible for these. These have the feet like mentioned and can encompass the entire line of figures A/B cases.

Cases will be 4.99 each. Every 20 cases gets you 5 free. Sick huh!! I will try to keep this trend even for the MOTUC line. Why go acrylic when you can get 5 acrylic cases for the price of 25 Zolocases LOL!!

Due to this being a prototype case, the hang tab is not shown.

Stay Tuned for what is to come!!

Again, the cases will be offered through zoloworld.com.

The original shipping date was going to be in mid March. The actual date may be the beginning of Ending of march to beginning of April. The revisions pushed it back a bit. I wanted these to be awesome.

Pre-Order yours as these will move very fast.

hope to see you there!!

[Josh Van Pelt]

Keep us posted. There is a great demand for cases that fit vintage carded MOTU figures.

[Warrior Knight]

Thanks Josh,

For all that are interested, I will be doing pre-orders within the next month. I am also working on the MOTUC line as well. I will let everyone know when they will be available.

[jmb410s]

Keep us informed, would love to put my collection in some cases

[Master Eternian]

this is GREAT NEWS !!!

Please keep me posted !!

[Warrior Knight]

Hello again,

I received a few first run prototype cases. These cases are awesome as the fitment is perfect. I have a few touch-up items left before I will begin pre-orders.

A few tidbits: The cases will be hinged at the bottom. I did this because I absolutely like the look better if you decide to hang on a wall (like me). The bubble on the case will look almost like the bubble on the card. This adds extra sharpness. The interlocking feature is easy to open and close, unlike some cases I had in the past. If you have a loose figure and card, you can put the figure with the card and have it "appear" like it has a bubble around it. Tell me what you think.

[Igorr]

Very sweet. I am a bit afraid to ask the price though? Not that they can be as much as the acrylic cases though. How much a piece? Would you give a deal for bulk orders, like 20+?

Will they fit ALL motu figures, some have different shaped bubbles? Thanks

[Warrior Knight]

Very sweet. I am a bit afraid to ask the price though? Not that they can be as much as the acrylic cases though. How much a piece? Would you give a deal for bulk orders, like 20+?

Will they fit ALL motu figures, some have different shaped bubbles? Thanks

estimated price will be 4.99 each. Yes, I will offer discounts on 20+. These will fit all standard a and b type bubbles.

[Igorr]

DUHHHH, sorry I am a total idiot. When I first looked at the post only the NEW stuff was there, and I DIDNT read or even see the top one. Haa!! Thanks, thats a pretty good price. I will shot you a pm sometime and see what we can work out. I think I have 35 carded figs and would be interested in buying one case for each. (If I can get that much money saved up. I have a hard time SAVING money) thanks

[Warrior Knight]

DUHHHH, sorry I am a total idiot. When I first looked at the post only the NEW stuff was there, and I DIDNT read or even see the top one. Haa!! Thanks, thats a pretty good price. I will shot you a pm sometime and see what we can work out. I think I have 35 carded figs and would be interested in buying one case for each. (If I can get that much money saved up. I have a hard time SAVING money) thanks

Actually, I started a new post and it was put to my old post, which I really wanted, but could not find it. thanks who ever moved it.

I have been through different style cases for all my action figures and I wanted to make something something totally different for one of my all time favorite toy lines. I have many figures carded, but i also have them loose with backers. I wanted to make something that will be the best of both worlds. Squeeze looks awesome in one of these loose with a backer.

[Master Eternian]

ah, AH, AAAAHHHHHHHHHHH!!!!!

I can't paypal till after tomorrow.. save me 30 Warrior Knight !!!

[Warrior Knight]

No problem, I will put you down for 30 Zolocases.

[sathomaso]

Thx for the update.
The cases turned out pretty awesome!!!

Looks really cool with the standee-feet on the bottom.

By the way, just out of curiousity, i am not planning to pin the plastic-cased figures to the wall anyway, but will they also get some sort of hangtab hole on the top border of the case ... or just left like it is currently. So one is able to punch a hole if desired.
I already like the current look, but i will still dig em with the small hanging hole up there.

EDIT: Oh i just read in your 1st post on page 1, that because these 2 shown are the prototypes they don't have a hangtab yet.

[Master Eternian]

No problem, I will put you down for 30 Zolocases.

Thank you, Thank you...

[Warrior Knight]

Thanks again for all the kind words. They really show off the MOC figure, as it makes the card look like it is in a better condition. I really have to admit sathomaso, the feet do add a touch more Bling effect LOL.

I want to extend another thank you to all that is pre-ordering these. This is great because you will be the first to receive them.

Next in line will be the loose clamshell, which will be available for pre-order once the initial wave is shipped and in your hands so you can see the quality and work that is put into these. I will give a sneak peek either today or tomorrow.

Again, thanks for the great words.

[Tuukka]

Warrior Knight
How about international shipping? There's only that $4 shipping.

[Facelessone]

I would be interested in 40 Cases (10 for free).

how much would be shipping for these cases to germany? Is it possible to ship them all in one box?

thanks for your comments.

[Warrior Knight]

This is the next Zolo World clamshell and will be available when the MOC case ships, which should be late March / early April. Tell me what you think.

I started a new thread because I did not want to confuse anybody. This is not a MOC case, it is a loose case. This will also have the hang tabs like all our other cases. The great part about this case is that you can put the loose figure, weapon and comic in the case. There is an indentation in the case to put the comic.

[brimstone72875]

That loose case looks amazing. Cannot wait to order those.

[Warrior Knight]

That loose case looks amazing. Cannot wait to order those.

Thank you, this next case is awesome because it takes the shape of what the original bubbles looked like back in the day. I also like the idea of being able to put everything in the case: figure, comic and weapon. The figure is a tight fit so he doesn't move all around in the case.

Warrior Knight
How about international shipping? There's only that $4 shipping.

International shipping has been fixed on the Zolo World site, as you now have an Worldwide checkout under the U.S. With the prices shown on the international section, I am splitting some money in there as well because the rates are a bit higher due to the size of the box I will be using to protect the cases, I am listing it as 15.00 when in reality it will be closer to 20.00. If anybody knows a cheaper rate, I will go the way you want.

I would be interested in 40 Cases (10 for free).

how much would be shipping for these cases to germany? Is it possible to ship them all in one box?

thanks for your comments.

All cases will be shipped in one box.

Thanks,

If there are any more questions, please do not hesitate to PM, E-mail or reply here.


The International shipping cart feature has been fixed and is now available for multiple purchases. Thanks again guys / gals.

[He-Breuly]

Hi Warrior Knight!

Just ordered my cases! Thanks a lot, and please let us know when "Deluxe" large cases are available... Thanks a lot guy, you rock!

[Warrior Knight]

Hi Warrior Knight!

Just ordered my cases! Thanks a lot, and please let us know when "Deluxe" large cases are available... Thanks a lot guy, you rock!

Thanks to all who have pre-ordered these cases thus far. I can say that there is a great deal of work and creativity that goes into each of our cases. I should have the cases ready to ship in the coming weeks.

After this case ships, the next case in the line will be the loose clamshell. It will also have feet as well as an area (indentation) to place the mini comic. This awesome case will go on pre-order once the vintage moc clamshell cases ship.

After the loose clamshell goes on pre-order, I am pleased to announce that the next Zolo World case will be the MOTUC case. I will have more details on that case soon.

[BURTDAWG]

This is the next Zolo World clamshell and will be available when the MOC case ships, which should be late March / early April. Tell me what you think.

I started a new thread because I did not want to confuse anybody. This is not a MOC case, it is a loose case. This will also have the hang tabs like all our other cases. The great part about this case is that you can put the loose figure, weapon and comic in the case. There is an indentation in the case to put the comic.

I dont have any vintage moc,but these loose figure cases are really cool.I'd love the get some of those.Right now I have loose complete figures in poly bags.I'd like to ditch them for these.Great work.

[Warrior Knight]

Thank you, if you are interested in these cases, be sure to subscribe to our sites newsletter. It will keep to up to date with new cases and events as well as products just added to the site. It will also let you know exactly when these cases ship.

The loose case will be available for pre-order right after the vintage MOC cases ship.

The loose case is an absolute must if you own loose He-Man or remco figures. The ability to have the mini comic, weapon and figure all in one place is totally sick. These will be 3.50 each if you buy under 30, but like all my cases, I will offer large quantity discounts. I will have more details once my first case ships. I do not want to get to far ahead of myself.

I will also feature a section that will allow combo packages for loose and moc toys. If I could have some feedback on approx. how many loose figures people have, this would be awesome.

Again, thinks for all the support and all the people who pre-ordered the vintage moc case, should have their cases real soon.

If these cases are as good as they look, you should look into making cases for the My Little Pony fans at mlparena.com. My wife hasn't found anything on the market to house her loose ponies.

If there is enough interest, we will be happy to run the case. I will check out the forum soon. Thanks for the heads up.

[Lookie]

If there is enough interest, we will be happy to run the case. I will check out the forum soon. Thanks for the heads up.

The one thing special about the My Little Pony figures is that they need ventilation. Apparently, if you completely cut out the air, they develop dots of mold on the plastic.