MOTUC Modulok and Multi-Bot

**Slaught** · April 30, 2011, 06:58am

That image by Emiliano looks awsome, but wheres his second set of arms?

**tmc1984** · April 30, 2011, 01:23pm

seeing that image always amazes me ... outstanding work ... and a perfect design for MOTUC! ...

**MoViEfReAk** · May 1, 2011, 12:35pm

Originally Posted by MegaGearMax

I like Emiliano's take on Modulok. Great belnd of Filmation and the vintage toy.

Of course, the detail would have to be toned down quite a bit, but I think this is the greatest Modulok yet!

Seeing that picture I realized that even Modulok could reuse a lot of parts from other figures... the front pair of legs looks like Whiplash/Buzz-Off/Clawful legs... the arms could be reused... the Horde armband, too.

And his insect legs could be reused for a possible 200x Buzz-Off Variant and/ or Mantenna-... just let your imagination flow

**Eterniandreams** · October 19, 2011, 12:17pm

How cool would it be if the new Modulok would have the SAME size pegs and holes as the vintage figure?

It would be like the fake dails and buttons but this would actually work.
Imagine to be able to mix and match. You dont have to, but just the possibility would be cool.

I already discussed it with my youngest son and he approves

**Prince Adam's Dad** · October 19, 2011, 01:01pm

That would definitely be cool, but I don't know how they could make that work with the different scales.

**Snake Hunter** · October 19, 2011, 01:08pm

No, MOTUC Modulok must use the same pegs (or at least connectors) for all the alternate heads in MOTUC. My Modulok can have a lot of usable heads.

**Eterniandreams** · October 19, 2011, 01:20pm

Originally Posted by Snake Hunter

No, MOTUC Modulok must use the same pegs (or at least connectors) for all the alternate heads in MOTUC. My Modulok can have a lot of usable heads.

Crab, that is a good point too.
I hate you for bursting my dream

Then they should at least have the Hiss plug, the Trapjaw/ Optik shoulders and the hand/ wrist plugs for total compatibility with all other MOTUC

**Prince Adam's Dad** · October 19, 2011, 01:23pm

Originally Posted by Snake Hunter

No, MOTUC Modulok must use the same pegs (or at least connectors) for all the alternate heads in MOTUC. My Modulok can have a lot of usable heads.

GREAT call. I like it.

**danielsan52** · October 19, 2011, 01:26pm

This time, I hope we get two torsos, one with a single neck peg, and another with a two necks for both heads. I always hated those bi-connector pieces.

**captainamerica** · October 19, 2011, 02:30pm

Originally Posted by Eterniandreams

How cool would it be if the new Modulok would have the SAME size pegs and holes as the vintage figure?

It would be like the fake dails and buttons but this would actually work.
Imagine to be able to mix and match. You dont have to, but just the possibility would be cool.

I already discussed it with my youngest son and he approves
http://i481.photobucket.com/albums/r...k/a5dd2314.jpg

What's he playing with, like 3 or 4 Moduloks? I bet he's having a blast!

**bskcase** · October 19, 2011, 02:43pm

I can't picture Matty going short on Modulok. All the pieces are there for the figure. Matty has already made removable heads, shoulder, and waists. Now they need to take it to the next step and create Modulok.

I would buy 3 of that figure just to get some cool combos out of him.

**Eterniandreams** · October 19, 2011, 02:51pm

Originally Posted by captainamerica

What's he playing with, like 3 or 4 Moduloks? I bet he's having a blast!

About 3 and a half. I bought 1 complete one and 3 incomplete ones.
My sons love him. IT was such a clever concept imho.

**Uki** · October 19, 2011, 03:12pm

Oh I agree that he HAS to be compatible with other Classics heads and attachments!

**Falconhood** · October 19, 2011, 03:26pm

Are we even getting a MOTUC Modulok? If so, can't they use an adaptor piece for the head, like they did for Kilowog in the GL Movie figs?

**DJ_Convoy** · October 19, 2011, 03:28pm

I have like 3 Moduloks (no Multi Bots yet)- and if there were compatibility, this would probably ensure that I climbed out of my cave and found some way to get a Classics Modulok.

**baronterror** · October 19, 2011, 03:37pm

I see your "same pegs" and raise you a "peg like roboto/Trapjaw/ect in MOTUC". I dont need my Mod to connect to the original one, but I'd like him to use the same system as MOTUC just because that would be neat and I like uniformity.

**Snake Hunter** · October 19, 2011, 03:47pm

A Modulok with multiple plugs for Roboto / Trap Jaw attachements in arms will be awesome. Imagine the multiple posibilities in order to create new monsters.

**bskcase** · October 19, 2011, 04:39pm

At this level in the MOTUC, it's not about "IF" Modulok is getting released, but "WHEN."

**phantom1592** · October 19, 2011, 04:54pm

I don't have the original anymore... so I'm ambivalant aobut that... especially with the differnt scales.

DEFINITELY want him to share weapons with TrapJaw/Roboto/hordak...

**iron_pride** · October 19, 2011, 07:31pm

Originally Posted by phantom1592

I don't have the original anymore... so I'm ambivalant aobut that... especially with the differnt scales.

DEFINITELY want him to share weapons with TrapJaw/Roboto/hordak...

That would be very cool. My only fear is that they won't make him interchangable at all. You know, since they say no action features. I suppose it would be easy to do, not much different that changing heads....I hope we do get him, and I'm sure we will, perhaps as an SDCC exclusive since they tend to have more pieces/surprises etc...

**sithjedi171** · October 20, 2011, 01:47am

I seriously hope when thes guys come around they package them like the vintage ones. In boxes !

**Jukka** · October 20, 2011, 04:16am

Originally Posted by Narom

I found this Modulok pic and I wonder if this will be his extrahead in MOTUC? In the cartoon he is planning to take Robotos mind to his "extrahead"

Actually Modulok was planning on transfering Man-At-Arms' brain onto his "extra head", thus giving Modulok more mental capabilities.

**hlinhk128** · October 20, 2011, 04:18am

Pretty cool ideas. The one neat thing I noticed is that if they make that 4 way leg crotch piece, that can be used again for Mantenna as well.

**King Tamusk** · October 20, 2011, 04:37am

I would like to see Modulok as the next SDCC exclusive. And he will come sculpted with all 22 original parts, plus his gun. And, for those that attend SDCC, they could get an extra "baggie" of NEW interchangable parts, never seen before, and available ONLY at SDCC. Kinda like how Swamp Thing had the Un-Men.

**hlinhk128** · October 20, 2011, 05:09pm

Don't give them ideas!!!!!!! I still haven't been able to track down Swamp Thing for a decent price and I managed to just get lucky getting the Gleek and suitcase!!!! I hate SDCC exclusives.....

I thnk the Horseemen would kill with Modulok. They excel at creatures!!!!

Thread: MOTUC Modulok and Multi-Bot

Thread Tools

Search Thread

Display

I want the Same pegs & holes for MOTUC Modulok

Posting Permissions