Snout Spout should be the bubble boy of the MOTUC at this rate.
Honestly where was our free figure as compensation for the Snout Spout disaster?!
Unlike Frosta, whose arms were easily exchanged, he really IS a defective figure.
Press down on dragon's head. It sprays enemies with a jet of water!
Press down on a camera's shutter release. It will take pictures that tell stories!
Snout Spout should be the bubble boy of the MOTUC at this rate.
Another nail in the coffin for MOTUC.
Preternia - When you tryna get dem J's and turn up with the squad and but yo ratchet side deek throwin mad shade.
Garanamyr, right out of the box, has a messed up neck peg (it's sitting too high, causing the head to just wobble around when fully attached) and the piece that holds the tail in is broken, so the tail won't stay on. I'm the only one I've seen so far with the neck issue, but I'm seeing at least a half dozen people so far with the same tail issue right out of the box.
wow, now I'm happy my Granny hasn't shipped yet, maybe the 2nd batch will be correctly assembled!
I will NEVER believe that Mermista beheaded Mer-Man! You sit on a throne of lies.... and smell of beef and cheese, bio writer!!!!
My TRU Skeletor has his ab crunch glued together, meaning he doesn't bend over no matter how hard I try. I think if I try a bit harder I'll break something. It doesn't bother me that much, but it still sucks. That's the only figure of mine that has any sort of bad QC issues (besides BG Teela's, Marlena's and Sy-Klone's bobble-heads). Even my Snout Spout has no issues whatsoever. His trunk is all in one piece.
This may not be a widespread issue, but I just got my Procrustus, and one of his arms was misassembled. His left forearm was attached backwards. This is pretty noticeable, because his "elbows" are sculpted to look like rocks. The rock elbow bit that is on the back of the forearm was right in the crook of his arm, and it prevented the elbow from bending the right way. The good news is that it is easily fixed by heating the joint. It can then be popped off and flipped back the correct way. It was also the correct forearm. There was no forearm switching.
hmm ill check mine tonight, didnt notice anything last night
the ignore list is my new best friend
One of my Procrustus figures looks to have a broken right arm at the bicep. :/
Two arms to assemble properly on "regular" figures already seem like an herculean task for those guys... What did you expect with a 4-arms figure?
For some reason, I dread the time when Mantenna (4 legs) Modulok (6 legs, 4 arms, 2 heads) and Multi-Bot (2 torsoes, 2 heads, 6 legs and 4 arms) will be released...
Last edited by Prahvus; December 21, 2012 at 10:15am.
Just like they knew there was a welding error (supposedly...cough, crap ass materials) on Goddess, yet they knew what could have happened to the figures, instead of destroying the batch, they sent them out anyway....and look what we got in return....and before anyone chimes in....if something is flawed either in material or the process, the factory is supposed to fix the issue, and recycle the affected batch, it's not Mattel's fault or ours that the factory didn't have the correct settings in the equipment, after all It's a vendor, not a Mattel factory....but maybe Mattel should keep a tighter reign on what goes on inside of where their product is made, or find new factories....
Recent.... HATMOTU Trap Jaw
Coming.... Classics Vultak
Wanted.... Classics Masque & Callix?
Oh man, did I forget to use these [sarcasm][/sarcasm] again? Sorry....
Does anybody else's Star Seed look like it got stuck in the gears of a polisher?
1. Shoemaker–Levy 9
3. Just a good, standard scratch.
This is such a pain in the ass. It is so tiring that the first thing I do when I get these toys is look at them for defects to see if I need to return them. It would be nice to enjoy them.
Seriously, do ANYBODY else's Star Seeds have any marrings on them? Do you think this is worth the hassle of a DR/matty return? I have about 25 days to think about it.
I've been reading for a time abou the painted black plastic issues that some people has been having with figures like Spikor. I've never experienced any of this until now, when I noticed that the plastic used for Rattlor's staff is actually black (at least for the golden staff part, not the red snake) and that the painting was flaking. This happened when I removed the staff from Rattlor's hand...
As this happened to me I expect more people having this issue as well. Perhaps I missed somewhere else where people talked about this...
Netossa arrived today. There is glue all over her face. In a not so flattering manner. If any of you have children have them leave the room before you click on the picture.
Click image for larger version.
$35.00 for this.
Now I get the joy of trying to exchange her with the most crack customer service team on the planet
So nobody's Mosquitor hands have broken off yet? Or is nobody twisting them at the wrist?
"I reject your Prince Adam and replace him with the original barbarian from the jungle."
Fan of the more Savage side of MOTU? Join the discussion at https://www.facebook.com/groups/savagemasters/
Check out my Custom Action Figure Art at www.InsidiousCustoms.blogspot.com
Follow me on Facebook at facebook.com/InsidiousCustoms
Buy Custom Figures at my Insidious Etsy Store.
So I was trying to find a list of most of the major problems on some Classics figures and couldn't find one. I've been collecting since I ordered two SDCC King Grayskulls and got both a regular and bronze variant! I was hooked. However I don't open them and only look at them when I get them.
I only hear about the problems until much later, and was hoping we could put together a list of all known problems. Such as:
Roboto: Arms are assembled backwards
Frosta: Forearms are swapped
Granamyr: Tail socket broken upon arrival, bobble head, arms falling off
Stinkor: Forearms are swapped
Swiftwind: Legs are assembled swapped
I just opened my Procrustus today....and sure enough! A Broken right back arm at the bicep and shoulder....guess I'll break out the super glue
Help help help!
She tumbled off the shelf but the stand didn't break in the fall. She was just standing up and the stand snapped in the center
I hope this is isolated to me and not anything more.
Does anyone have any clever thoughts on a fix? The center tube is hollow. I'd like to avoid gluing.