Post your "MIX & MATCH" MOTUC figure Photos!!

[CanadaClassics]

Any customizers out there ever removed or swaped arms at the bicep cut? Are they attached like the hand and boots are with a heat up and separate peg?

Also if someone owns a King He-man and he-ro...could we see a shot of King heman body with hero armor and cape with TRU or normal he-man head on him?

[shadowfall1976]

Any customizers out there ever removed or swaped arms at the bicep cut? Are they attached like the hand and boots are with a heat up and separate peg?

Also if someone owns a King He-man and he-ro...could we see a shot of King heman body with hero armor and cape with TRU or normal he-man head on him?

The shoulder has the peg, the bicep has the hole, but it's the same as hands, just may take a little more effort.

[hadley]

I finished off my Skeletor kitbash. Hot water definitely works better than a hair dryer for popping limbs. Here he is.... can you even tell what is different about him?

skele.jpg

He's a basic Skeletor figure with Keldor's armor, cape, and the Alcala head, obviously. But I also put Keldor's loincloth and greaves on him. Oh yeah, and he's got Faceless One's version of the staff. Replacing the feet was the hardest part. That little peg is a serious pain to get in there. They're still not in there all the way, but they're close enough. I gotta do something about that little smudge on his foot. He came that way though, and I think it gives him character. You can see his ankle holes are a little scuffed up. Hopefully it'll get better.

And here we go with another kitbash that was a heck of a lot of work for nearly no gain!

bafaker.jpg

Previously I just had the Kevin Kosse Battle Damage Faker head on a BA Skelly body. The coloring of the Kosse head was a little bright for that body though. so this is Keldor's body with the Skeletor loincloth on it, and the BA Skelly duckfeets. Why not Keldor's shoes? Well, since I took his greaves for Skeletor, the boots won't match. Maybe I'll repaint them one day. I'm helping him stand up a bit because he's still a little gummy from his hot water bath. I didn't leave him in the fridge long enough.

When I was yanking off the legs to switch loincloths, the entire leg piece came off at the crotch. Man oh MAN is that tough to put back together. I had to crack the whole thing open to get it back together. It sucked. And now one of his parts has the ridges from the inside of my needle nose pliers imprinted on it.

I didn't take a picture of it, but I put regular Skeletor's armor on regular Faker. I just don't like the orange stuff.

[Zodac Prime]

I just got a 2 pack Stratos from Evilbay and the bicep peg sheared off completely. I tried super gluing it, but it's not bonding for whatever reason.

[CanadaClassics]

FIGURE PIC REQUEST:

HE-RO + armor

Attachment 84100

on King He-Man body

Attachment 84101

with regular He-Man head

Attachment 84102

Can we see a pic of that figure please?

[DO4M]

Here's something for the Vintage Fans!! a More Vintage looking MOTUC Randor!

[Nianotreve]

For CanadaClassics

DSC_0357.jpg

the KingHe neck piece is longer, possibly to compensate the cape sitting over it. the skin tones are a little different too

[CanadaClassics]

Not bad I do like the all gold cheat and red cape...but the tan lines and the neck issue...funny...BA He-Man has no neck...

Thanks!

I still think I might want to get a HE-RO and keep him as is...as soon as I figure out this Jewel thing....and I don't want to get one with a SDCC tatoo on his chest...

[Charlie Brown]

well, i'm really diggin' he-ro's armor with king he-man's loincloth.

_____________

playing around with the idea of a magic lab for orko...

[Shadow-Ra]

Any customizers out there ever removed or swaped arms at the bicep cut? Are they attached like the hand and boots are with a heat up and separate peg?

Also if someone owns a King He-man and he-ro...could we see a shot of King heman body with hero armor and cape with TRU or normal he-man head on him?

I did this with Frosta, I found it very easy, and I'm not used to doing things like that

[Rakashian Calamari]

Anyone have the new Batman figure from mattel that uses MOTUC parts? Are you able to swap MOTUC heads/armor onto the buck? I'd like to see it if it is an option if anyone has it. I think it could make some cool Horde customs.

[Lay Ze-Man]

Anyone have the new Batman figure from mattel that uses MOTUC parts? Are you able to swap MOTUC heads/armor onto the buck? I'd like to see it if it is an option if anyone has it. I think it could make some cool Horde customs.

Yes, the DKR Frank Miller style Bats can swap heads with the male MOTUC figures.
He-Man looks pretty awesome in the bat suit.

[stormtripper]

Anyone have the new Batman figure from mattel that uses MOTUC parts? Are you able to swap MOTUC heads/armor onto the buck? I'd like to see it if it is an option if anyone has it. I think it could make some cool Horde customs.

got it yesterday, it cost me $25 taxes in at a local shop, the cape is glued which is too bad. My son likes the fisto head on the buck as he thinks it looks like batman when he re-immerges in society.

[Pesmerga]

what is the complete name of that batman figure?? I would like to look for it on the internet..

[Lockdown]

what is the complete name of that batman figure?? I would like to look for it on the internet..

Dark Knight Returns Batman from the Batman Unlimited series

[tycondrius]

dunno if this counts but here


200x style Rattlor. aka the General. I think matty or someone needs to make an upgrade kit for this guy. I know my LBC has been done before buy somone else as I can't be the only person to do it. but I would love to see someone make a more accurate one with clip on Armour that go over the shin's and elbows to match the General. similar to Vikor was it ? or who ever that concept figure was with the tank head and fett style head.

[CanadaClassics]

Looks like we won't get a mini comic (Oolar) barbarian He-Man so.....

Attachment 84393

[Rakashian Calamari]

I picked up the Batman figure at a comic shop the other day and it is a perfect match for MOTUC figures for swapping. The cape is glued but can be pried off by pulling hard if you want to customize him. I've made him into a Horde guy. Gave him Carnivus' cape and Horde Prime's armor, an armband and an extra Hordak crossbow and red bat. He looks pretty cool.

[iron_pride]

I picked up the Batman figure at a comic shop the other day and it is a perfect match for MOTUC figures for swapping. The cape is glued but can be pried off by pulling hard if you want to customize him. I've made him into a Horde guy. Gave him Carnivus' cape and Horde Prime's armor, an armband and an extra Hordak crossbow and red bat. He looks pretty cool.

Do you have a pic? I have a couple of them to do the same exact thing.

[CanadaClassics]

.
.
.
QUESTION: Is Hurricane Hordaks grey skin colour the same as regular Hordak's Grey? I know we have had different Skeletor skins...is Hordaks the same?

[Barnster]

..
QUESTION: Is Hurricane Hordaks grey skin colour the same as regular Hordak's Grey? I know we have had different Skeletor skins...is Hordaks the same?

No, Hurricane Hordak is darker than regular Hordak.

[stprime]

i'm still waiting for some mixmatch batman fun time. make it happen!

[Uki]

Yeah, I want some Batman Mixes!

[Rakashian Calamari]

Do you have a pic? I have a couple of them to do the same exact thing.

hopefully they attach. I haven't had the best luck with getting photo attachments to post on here. The thing that surprised me the most is that Mattel managed to successfully give a male figure pants/outer underwear on the MOTUC buck with the Batman figure. If I recall correctly this wasn't achieved with other similar figures in MOTUC and they have a small gap.

Horde Bow 1.jpgHorde Bow 2.jpgHorde Bow 3.jpg

[iron_pride]

hopefully they attach. I haven't had the best luck with getting photo attachments to post on here. The thing that surprised me the most is that Mattel managed to successfully give a male figure pants/outer underwear on the MOTUC buck with the Batman figure. If I recall correctly this wasn't achieved with other similar figures in MOTUC and they have a small gap.

Oh yeah that looks great. Thanks for posting these pics.....