MOTUC custom Laser Light Skeletor WIP

**masterenglish** · December 4, 2009, 01:20pm

I've been working on this guy for months on and off. Seems like I'm finally getting somewhere.
I still have to solder the electronics to the LED light, then insert the LED into the arm. Also needs some more sculpting in various places.
I'm kinda thinking of completely redoing the skull on the belt.

**Brian Ozone** · December 4, 2009, 01:30pm

sweet me!

I really want to see this one

**He-bro** · December 4, 2009, 01:34pm

Wow, this is going to look so cool, when it is done.

Did you cast that clear parts yourself?

**coinilius** · December 4, 2009, 01:50pm

that looks like a great start!

**chrisbryan** · December 4, 2009, 02:05pm

Amazing work! Your sculpting skills are top notch!!

Chris

**Eterniandreams** · December 4, 2009, 02:53pm

Awesome is it a commission or for ebay?

You should use the smaller SMD LED lights, they are a lot smaller but I guess you know that. I bought some with wires attached already.

PM me if you can sell the staff, lower arm, head and perhaps chestpiece recasted loose.

Is the head scratchbuild or borrowed?

**Orko-78** · December 4, 2009, 03:00pm

Ah, the man is coming up with something new.

**okydoky** · December 4, 2009, 03:43pm

I have high expectations for this one....and I know Masterenglish is not going to disappoint...

**Faceless One** · December 4, 2009, 04:12pm

Looks great

. That translucid staff and arm are amazing.

**Necrotizer** · December 4, 2009, 04:14pm

I'm excited for this one. Your projects are always incredible!

**Villa-man** · December 4, 2009, 05:35pm

Your stuff is so fantasic! I would love to own this but I have a feeling this is going to sell for big money!

**passiondesigns** · December 4, 2009, 07:38pm

this will be sick man!!!!!!!!! very pumped about the concept dude!

**nicholighkun** · December 4, 2009, 08:15pm

It would be cool to see a pic of the original too! This is looking amazing so far! Great job!

**King Kahn** · December 4, 2009, 10:12pm

masterenglish, if i cut off your head do i get your power? is that how it works?

wait....that's highlander....nevermind.....umm

good job so far

**Oz-Scott** · December 4, 2009, 10:21pm

Sign me up for updates on this one!!!

**Mike Bock** · December 5, 2009, 12:45am

I'm drooling already!!

**passiondesigns** · December 5, 2009, 01:20am

http://www.modeltrainsoftware.com/ledlights1.html

Master check out this link if your looking for small leds lights .

**Evil_Horde** · December 5, 2009, 07:46am

Amazing!! I love this!

**PaoloKr** · December 5, 2009, 07:50am

looks good so far!

**badmouse** · December 5, 2009, 08:09am

looks great! from what figure is that head ?

**danbrenus** · December 5, 2009, 08:13am

After that amazing Spikor of your, I can't figure how you can do better, but your talent is so astonishing I already know you'll surprise us all.

**THE RAW** · December 5, 2009, 09:44am

wow, the thing i like most on this figure is that you now cast your own parts...respect!!!

**Rhanen** · December 5, 2009, 10:11am

Man, I'm just amazed by the transluscent staff, so I'm eager with anxiety to see this figure completed

Excellent work! Congratulations

**masterenglish** · December 5, 2009, 11:04am

Thanks much everyone! I was hoping you guys would be as excited as I am about him. Hes still got a pretty good amount of work to be done, & it helps a lot to get some motivation from ya'll.

Originally Posted by He-bro

Wow, this is going to look so cool, when it is done.

Did you cast that clear parts yourself?

Yes I did, for a total of 6 seperate molds.... The Rams head, Horn, Horn, Staff, Forearm, & Hand. I finally figured out how to get nearly bubbleless castings in translucent.
The only thing is, the plastics a bit harder than the hand plastic Mattel uses, so you have to heat up his hand a bit to get the staff in. Still, a small price to pay for a MOTUC Laser Light?

Originally Posted by Johnny_E

Awesome is it a commission or for ebay?

You should use the smaller SMD LED lights, they are a lot smaller but I guess you know that. I bought some with wires attached already.

PM me if you can sell the staff, lower arm, head and perhaps chestpiece recasted loose.

Is the head scratchbuild or borrowed?

Well neither really. As of now, its just a project for me. Its very possible I will sell him once complete, but at this point no set plans.
I wasnt aware of the smaller LEDs, after looking at the ones I have, they might be a little big.
The head is a recast Scareglow.

Originally Posted by nicholighkun

It would be cool to see a pic of the original too! This is looking amazing so far! Great job!

I will post a pic of the original asap for comparison. Good call!

Originally Posted by King Kahn

masterenglish, if i cut off your head do i get your power? is that how it works?

wait....that's highlander....nevermind.....umm

good job so far

Thats how I got mine...

Originally Posted by passiondesigns

http://www.modeltrainsoftware.com/ledlights1.html

Master check out this link if your looking for small leds lights .

Dude, thanks a lot!

Originally Posted by badmouse

looks great! from what figure is that head ?

It is a recast Scareglow. I can recast pretty much any head I get now.

Originally Posted by THE RAW

wow, the thing i like most on this figure is that you now cast your own parts...respect!!!

Thanks, I have been pretty heavy into casting lately. Its great.

**Beeto Bot** · December 5, 2009, 02:56pm

Man this looks amazing so far. How did you get a bubble free casting with that clear resin?

Thread: MOTUC custom Laser Light Skeletor WIP

Thread Tools

Search Thread

Display

MOTUC custom Laser Light Skeletor WIP

Posting Permissions