[POSSIBLE] M.O.T.U.C. [Unmade] Figure Total "Tool/Part" Counts

[Replikor]

I went thru the pictures of the Vintage MOTU, and some PoP figures listed on the site here on the ORG.
I did ALOT of comparisons to the parts used [SO FAR] for the MOTUC figure versions and the various pictures on the ORG here of the vintage versions. From that I managed to make this list up. So here is my VERSION 1.6 list of the amounts of new parts required for the unmade figures still atm...

Further figures will be added whenever possible.


[Listed starting in order of least new parts required to make a figure then alphabetical when same amount]
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
FUERZA-T - Carnivor = [0 parts needing tooled]
=already tooled parts= Complete Clawful "except - full legs, Weapon, and all of arm parts past shoulders going down"; Beast Man - full legs, and full arms "from below shoulders on down"; Webstor Head; Stratos Flightpack torso clip on accessory; Kobra Khan Loincloth
=new part sculpts needed=


FUERZA-T - Destructor = [0 parts needing tooled]
=already tooled parts= Complete Clawful "except - full legs, Weapon, and all of arm parts past shoulders going down"; Beast Man - full legs, and full arms "from below shoulders on down"; Skeletor Havoc Staff; Kobra Khan Loincloth
=new part sculpts needed=


FUERZA-T - Felinor = [0 parts needing tooled]
=already tooled parts= Complete Beast Man "except - head, accessories and armor"; Stinkor 200X head; Skeletor Armor and Swords; Kobra Khan Loincloth
=new part sculpts needed=


FUERZA-T - Pantano = [0 parts needing tooled]
=already tooled parts= Complete Beast Man "except - all beast man accessories and armor"; MerMan Armor and Sword; Kobra Khan Loincloth
=new part sculpts needed=


FUERZA-T - Platino = [0 parts needing tooled]
=already tooled parts= Standard Heman "except - Face, swords, torso armor,and Right full arm"; Fisto's Right Full arm; King Randor's -or- Jistu's Armor; He-Man Axe weapon and "Hair"; Count Marzo Face; Kobra Khan Loincloth
=new part sculpts needed=


FUERZA-T - Shidoshi = [0 parts needing tooled]
=already tooled parts= Standard Heman "except head, Right full arm, and all accessories"; Fisto's Torso Armor & sword; Kobra Khan Loincloth
=new part sculpts needed= none


FUERZA-T - Tekno = [0 parts needing tooled]
=already tooled parts= Complete Trap Jaw "except - head; right side black torso covering armor, green belt"; Kobra Khan Loincloth; Zodac Head
=new part sculpts needed=


P.O.P. - Arrow = [0 parts needing tooled]
==already tooled parts= SwiftWind figure, Wings, Saddle
==new part sculpts needed=


P.O.P. - Crystal Moonbeam = [0 parts needing tooled]
==already tooled parts= SwiftWind figure, Wings, Saddle
==new part sculpts needed=

P.O.P.- Storm = [0 parts needing tooled]
==already tooled parts= Swiftwind, Saddle, wings,
==new part sculpts needed=


P.O.P. - Crystal Sun Dancer = [0 parts needing tooled]
==already tooled parts= SwiftWind figure, Wings, Saddle
==new part sculpts needed=


P.O.P. - Crystal Swiftwind = [0 parts needing tooled]
==already tooled parts= SwiftWind figure, Wings, Saddle
==new part sculpts needed=


M.O.T.U. "Variant" - Kamo Khan = [0 parts needing tooled]
=already tooled parts= Compelte Kobra Khan; Clawful Mace
=new part sculpts needed= [none]


FILMATION: HeMan - Danavas = [1 parts needing tooled]
=already tooled parts= TRU heman buck/body "except" head; TriKlops Torso over body armor, Man-At-Arms - Mace
=new part sculpts needed= Head


FILMATION: HeMan - Jarvan = [1 parts needing tooled]
=already tooled parts= Preternia Disguise Heman "except" head, accessories, Boots, feet; Keldor - Cape, Boots, feet; Weapons Wrack PAck - Large Dagger
=new part sculpts needed= Head


FILMATION: HeMan - Plundor = [1 parts needing tooled]
=already tooled parts= Standard HeMan buck body "except" - head, boots, and feet; TriKlops Torso over body armor; Skeletor - Boots, Feet
=new part sculpts needed= head


FUERZA-T - Titano = [1 parts needing tooled]
=already tooled parts= TRU He-Man full Arms and Full legs, Kobra Khan Loincloth; Man-At-Arms Clip over Torso armor and Mace; Fisto "vintage style" Head
=new part sculpts needed= Discus Weapon


MOTU Comic's - Sleetah = [1 parts needing tooled]
=already tooled parts= Complete Pantor "Except" - Head*
=new part sculpts needed= Head,*
Notes: Mattel could "VERY" possibly use the battlecat/panthor saddle to make Sleetah look more vintage MOTU before transfering into a MOTUC update, which if htey did, they could actually use 100% pantho an jsut use a diffrent head clipon helmet like in the illustration.


N.A. of HeMan - Adam of Grayskull = [1 parts needing tooled]
==already tooled parts= N.A. Heman Sword, King Grayskull "reissue" hair, Preternia Disguise Heman "except" hair, and all accessories
==new part sculpts needed= Torso over Body Sash with cape


Concept Character - Horde Skeletor Apprentice Skeletor = [2 parts needing tooled]
==already tooled parts= Complete Skeletor "except" - the head; Demo-Man Alcala skeletor insert for head
==new part sculpts needed= Torso over body armor Front & Back sections


FILMATION: HeMan - Uncle Montork = [2 parts needing tooled]
=already tooled parts= Orko's - Torso, full arms & hands, Hat/head, Orko's Wand
=new part sculpts needed= Neck cover with Beard, Black orb with Square glasses


P.O.P. - Royal Swiftwind = [2 parts needing tooled]
==already tooled parts= SwiftWind figure, Wings, Saddle
==new part sculpts needed= gold saddle armor, gold reigns


P.O.P.- Silver Storm = [2 parts needing tooled]
==already tooled parts= Swiftwind, Saddle, wings,
==new part sculpts needed= silver blanket, silver mask


200X/Masters of the Universe - He-Man: Snake Armor Variant = [3 parts needing tooled]
==already tooled parts= Standard buck/body - except Full right arm and full right leg; Heman full head; Draegoman Right shoulder, Upper right arm, upper right leg and lower right leg; Trap Jaw Boots; ZodaK Feet; Man-At-Arms 200X "techno" Powersword
==new part sculpts needed= *fixed/non-removable partial torso covering armor with sculpted on shoulder plates, Loincloth Right forarm with sculpted on snake claws


FILMATION: HeMan - Dree Elle = [3 parts needing tooled]
=already tooled parts= Orko's - torso, full arms & hands, Orko's Wand
=new part sculpts needed= Head/hat, Female eyes black orb insert, Vail for neck connector
*

FILMATION: HeMan - Garn = [3 parts needing tooled]
=already tooled parts= TRU heman buck/body "except" head; Hordak Armbands
=new part sculpts needed= Head, Helmet, Torso Over Body Armor


FILMATION: HeMan - Shokoti = [3 parts needing tooled]
=already tooled parts= Complete Adora "Except" - Torso over body clothing "one peice" and all accessories
=new part sculpts needed= "Clip on" Headdress, Cape with shoulder mantle an necklace, Torso Over Body clothing "one Piece"


M.O.T.U. - Buzzsaw Hordak = [3 parts needing tooled]
==already tooled parts= Complete standard Hordak & accessories- "EXCEPT" the upper torso and torso over body armor
==new part sculpts needed= Upper chest sculpted with minor cavity and sculpted in buzzsaw, Torso over body armor with open cavity, Cover panel for the Torso over body armor


M.O.T.U.- Horde Trooper = [3 parts needing tooled]
==already tooled parts= Standard upper torso & shoulders; Standard Hordak abs; King Hiss Upper arm; ZodaK loincloth; Vykron forarms and hands with
Tank arm clip on covers, Vykron boots and Tank leg covers; Trap Jaw Upper legs
==new part sculpts needed= Tech Spear weapon, Trooper Head, Torso body armor cover - slush head style


M.O.T.U.- Saurod = [3 parts needing tooled]
==already tooled parts= “Orange” Snake Man 2Pak figure complete “except loincloth, forearms Upper legs, and Head”, Leech shoulder armor –for both sides, Bow Forearms Weapons Rack Pistol; ZodaK loincloth; Optikk style Upper legs
==new part sculpts needed= Head, Torso over body armor Front section, Torso over body armor back section with techno tail


MOTU Comic's - Lodar = [3 parts needing tooled]
=already tooled parts= Standard HeMan "Buck Body" -Except - head, forearms, loincloth, boots, all accessories; Spikor's Forearms, Beast Man's upper Arm- Shoulderpad Spiked Armor; Demo Man's lower legs, Palace Guard feet
=new part sculpts needed= Head, Torso over body Armor, Loincloth


FILMATION: HeMan - Icer = [4 parts needing tooled]
==already tooled parts= Standard He-Man "except" the head, forearms, and loincloth; Demo-Man loincloth
==new part sculpts needed= Head fur hood, Head insert for fur hood, Right Fur forearm, Left Fur Forearm, Possibly a large Icicle weapon


FILMATION: HeMan - StrongArm = [4 parts needing tooled]
=already tooled parts= "standard" He-Man Torso, Abs, Right & left shoulders, Left Bicep, Left Hand, loincloth, Upper & Lower legs; Faceless Ones "gloved" left forearm; Fisto's Right fist/forearm"; Bow's Boots
=new part sculpts needed= Head, Torso over body armor "Shoulder Mantle" with ringed "icarus style" neck cover, Ringed Upper Right Bicep, Right "preglove" forearm


M.O.T.U.- Blast Attack = [4 parts needing tooled]
==already tooled parts= Standard heman torso + abs, Trap jaw shoulders, Roboto upper arms, forearms, and hands, Trap Jaw lower leg “boots”
==new part sculpts needed= Head, loincloth, upper Right leg, Upper Left leg


M.O.T.U.- Flying Fists - He-Man = [4 parts needing tooled]
=already tooled parts= Complete He-Man figure,
=new part sculpts needed= Torso over body armor FRONT section, Torso over body armor back section with red peg, Weapon rear “clip-on section”, Weapon spinning maces section.


M.O.T.U.- Terror Claws Skeletor = [4 parts needing tooled]
==already tooled parts= Skeletor complete “except loincloth” He-Man loincloth
==new part sculpts needed= Torso over body armor Front section, Torso over body armor back section with dragon skull n bones, Right Arm Snap on Terror claw, Left Arm Snap on Terror claw


MOTU Comic's - Illumina = [4 parts needing tooled]
=already tooled parts= "Standard" Female Buck/body "except" - Head, Torso over body clothing*
=new part sculpts needed= Head, Torso over body clothing, Cape, Weapon*
Notes: This build is based off of the Toy version design illustration done by Emiliano.


M.O.T.U. - 200X - Baddhra= [4 parts needing tooled]
=already tooled parts= Clawful Buck/body "except" - head, foreams+ claws, boots, feet; Faceless one's -Foreams, Hands, Skeletor - boots, Palace Guard Feet
=new part sculpts needed= Head, Torso over Body Armor, Spiked Mace Weapon, Shield


M.O.T.U. - 200X - Tuvar= [4 parts needing tooled]
=already tooled parts= Skeletor Buck/body "except" - head, Right, foream, lower legs, boots, feet; Heman's - Right Foream; Man-E-Faces Right Hand, Mighty Spector - lower Legs, Boots, feet - boots, Palace Guard Feet
=new part sculpts needed= Head, Torso over Body Armor, loincloth, Sai Blades [x2]
Notes: Tuvar would be bumped to 5 parts if they made his clip on invisibility vail for his head.


P.O.P. - Clawdeen = [4 parts needing tooled]
==already tooled parts= Battlecat [body] "except the head & neck"
==new part sculpts needed= Head, Neck, Saddle, Saddle strap


FILMATION: HeMan - Batros = [4 parts needing tooled]
=already tooled parts= Compelte Palace guard "Except"- head, boots forearms, HeMans Chestharness "back conenctor strap", Orko's Book, Shadow Weaver's Book; Heman Boots - black shadow under top fur "ring of boot" area
=new part sculpts needed= Head, Torso chest harnes with "icarus style neck cover and attached batwings ending in wrist pegs, Right Forearm, Left Forearm


N.A. of HeMan - Hydron = [4 parts needing tooled]
==already tooled parts= HeMan buck/body "Except"- forearms, loincloth, boots and feet; Optikk forearms, Slush Heads Boots and loincloth and feet "for flippers" and head covering dome; Mighty Spectors "thigh" strap and gun holder; Evil Lyn's Dagger;
==new part sculpts needed= head, Torso over body armor, Torso over body armor Scuba backpack with breater hose that slips over dome into front of body, Weapon


N.A. of HeMan - Flogg = [4 parts needing tooled]
==already tooled parts= King Hiss Shoulders, Upper arms, Trap Jaw hands, King Hiss Upper leg, Roboto Boots, Whiplash Feet Vykron Forearms, hands, and "tank" forearm clipon covers; ZodaK loincloth
==new part sculpts needed= Head, Helmet -or- Helmeted Second Head, Torso over body armor with sculpted on Shoulder & neck mantle, Weapon


N.A. of HeMan - Tuskador = [4 parts needing tooled]
==already tooled parts= Standard buck/body "except" - Upper legs, forarms, boots, feet; Heman "Face"; King Hiss Upper legs; Bow Forearms, Boots; Icarus loincloth and Feet; Vykron Hands
==new part sculpts needed= Right Shoulder, Left shoulder, Torso body cover with sculpted on helmet and tusks - slush head style, weapon


FILMATION: HeMan - Lord Masque = [5 parts needing tooled]
=already tooled parts= Complete Keldor an cape "Except" - Head, sword, acid vial, and chest harness; Skeletor - Hood section of head; Facless Ones "Gloved" Forearms
=new part sculpts needed= Masked Head insert for skeletor hood, Chest harness, Loincloth, Right Upper leg, Left Upper leg
NOTE: Mattel could also just make a wrap-around leg strap for each leg that clip in the back like the palace guard,instead of two new upper legs, but this would still be the same number of parts needed, as each would be crafted/shaped to fit each leg properly.


M.O.T.U.- Laser Power He-Man = [5 parts needing tooled]
==already tooled parts= Complete He-Man “except the head, loincloth, and boots”, Bows boots, Palace Guard “full right arm armor” Man-E-Faces “Feet” Faceless one Hands & “gloved” Forearms
==new part sculpts needed= New Adventures He-Man head, Torso over body armor Front section, Torso over body armor back section “battery pack”, Loincloth, Laser Sword


FILMATION: - Mantenna = [5 parts needing tooled]
==already tooled parts= Syclone - Shoulders, Upper arms & Hands; Whiplash forearms; Standard Torso and abs; Trap Jaw Feet; HeMan upper and lower legs for all three legs; Hordak Boots; Grizzlor Weapon
==new part sculpts needed= Head with Eyes in, Head with eyes extended out, Torso Wrap around "attached Dragoman style armor", loincloth, "modulok style" crotch connector piece


M.O.T.U.- Mantenna = [5 parts needing tooled]
==already tooled parts= Syclone - Shoulders, Upper arms & Hands; Whiplash forearms; Standard Torso and abs; Trap Jaw Feet; HeMan upper and lower legs for inner legs; Whiplash upper and lower legs for outter legs"; Hordak Boots; Grizzlor Weapon
==new part sculpts needed= Head with Eyes in, Head with eyes extended out, Torso Wrap around "attached Dragoman style armor", loincloth, New "modulok style" crotch connector piece


M.O.T.U.- Tung Lashor = [5 parts needing tooled]
==already tooled parts= King Hiss Staff , “Yellow” Snake man from 2pak “all except head, upper chest, Forearms, hands, and armor, Faceless one gloved forearms
==new part sculpts needed= Head tongue in, Head Tongue out, Upper Torso, Hands, Dragonfly Crossbow Weapon


N.A. of HeMan - Spinwit = [5 parts needing tooled]
==already tooled parts= Starndard He-Man buck/body - except forearms, head, boots; Optikk loincloth, full legs; Bow Forearms
==new part sculpts needed= Head, Torso Body cover - slush head style; Right Full Arm Clip Spin shield, Left Full Arm Clip on Spin shield; Weapon


N.A. of HeMan - Battle Punch He-Man = [6 parts needing tooled]
==already tooled parts= Palace Guard "boot" feet; Icarus loincloth; Complete TRU He-Man "except"- for head, loincloth, and both Boots; Bow's Loincloth
==new part sculpts needed= New Adventures Head, Torso over body armor Harness, Right Boot, Left Boot, Sword, Energy Shield


M.O.T.U.- Dragstor = [6 parts needing tooled]
=already tooled parts= Faceless one ‘s shoulders, upper arms & forearms, palace guard hands, Hordak/Grizzlor weapon rear section, Bow boots, He-Man torso & abs, man-e styles loincloth
=new part sculpts needed= Hordak/Grizzlor weapon custom front “head” section, Torso over body armor FRONT section with sculpted on wheel, Torso over body armor back section with engine, Head, Upper legs, Lower leg


M.O.T.U.- Laser Light Skeletor= [6 parts needing tooled]
==already tooled parts= Alcala Skeletor Head, Keldor cape, Skeletor Havoc Staff, Robot Arms, Clawful Feet
==new part sculpts needed= Upper Torso, Torso Abs, Torso over body armor front section, Torso over body armor back section, Upper legs, Lower legs,


M.O.T.U.- Ninjor= [6 parts needing tooled]
==already tooled parts= He-Man complete “except forearms, Boots, and head”, Skeletor Boots, Faceless one Gloved Forearms
==new part sculpts needed= Masked Head, Torso over body armor Front section with dragon crest, Back armor clasp, Techno Crossbow, Nunchuku, Katanna sword


M.O.T.U.- Two Bad = [6 parts needing tooled]
==already tooled parts= He-Man loincloth & Upper and lower right leg, and hands, Whiplash upper and lower left leg, Man –E faces right foot, Palace guard left foot, Bow right forearm, Faceless one left gloved forearm
==new part sculpts needed= Head 1, Head 2, Deluxe wide torso with 2 neck peg holes, Lower Left boot, Lower Right Boot, Shield


N.A. of HeMan - Skeletor = [6 parts needing tooled]
==already tooled parts= Man-at-arms "helmet mold section of the head"; Skeletor shoulders & Upper arms, Faceless One Gloved forearms & hands; Kobra Khan Loincloth, Roboto Lower legs, Boots, Feet; Keldor Cape
==new part sculpts needed= Skeletor face insert "for Man-at-arms helmet", Torso, Torso over body armor, Upper Right Leg, Upper Left, "Movie Skeletor" Staff Weapon


N.A. of HeMan - Skeletor: Battle Blade Variant = [6 parts needing tooled]
==already tooled parts= Standard Skeletor hooded face's -"skull face insert", torso, and Right Shoulder, and left hand; King Hiss left Shoulder; Roboto left & right bicep, Left & right forearm, left glove, Upper Legs; Clawful Feet, Vykron - Boots & feet and clip on "Tank armor lower leg covers
==new part sculpts needed= Head, Torso over body armor, Loincloth, right hand, quadro-blade throwing axe, deflector shield


N.A. of HeMan - Vizar = [6 parts needing tooled]
==already tooled parts= Standard Buck/Body "except" - upper legs forarms, loincloth, boots and feet; Black skinned palace guard human head "face insert for helmet" as it matches Vizar's face very well; TRU heman right forarm; Trap Jaw left forearm; Vykron Left hand; Bow's Boots; Roboto's Feet; Webstors "hook"; Icarus loincloth
==new part sculpts needed= Helmet for face insert, Helmetless head, non removable torso sculpted armor, upper left leg, upper right leg, weapon


N.A. of HeMan - Butthead = [7 parts needing tooled]
==already tooled parts= Standard buck/body - except upper legs, shoulders, forarms; Bow Forearms, Vykron Hands; Robot Shoulders; Roboto Boots & feet; Mekaneck Neck extentions
==new part sculpts needed= Head, Form fitted/clip on face mask, Torso body cover front, Torso body cover back with square pack, Upper Right leg, Upper left Leg, weapon


N.A. of HeMan - Kayo = [7 parts needing tooled]
==already tooled parts= Icarus "Alternate Head", Roboto's Complete Arms, Bow's Upper & Lower legs, Icarus "flipshot's" feet
==new part sculpts needed= Helmet, Torso, Over Shoulder Armor/Mantle, Loincloth, Boots, Weapon, Shield


M.O.T.U.- Rokkon = [8 parts needing tooled]
==already tooled parts= "No Mustache" Man-At-Arms face for helmet insert; Standard Torso & abs; Roboto full arms and legs; Icarus Loincloth
==new part sculpts needed= helmet for face insert with ROCKs made to back of helmet, Torso body cover front, Torso body ROCKS/back cover, Clipon/form fitted full right arm ROCKS, Clipon/form fitted full left arm ROCKS, Clipon/form fitted full right leg ROCKS, Clipon/form fitted full left leg ROCKS, Weapon


M.O.T.U.- Stonedar = [8 parts needing tooled]
==already tooled parts= "No Mustache" Man-At-Arms face for helmet insert; Standard Torso & abs; Roboto full arms and legs; ZodaK Loincloth
==new part sculpts needed= helmet for face insert with ROCKs made to back of helmet, Torso body cover front, Torso body ROCKS/back cover, Clipon/form fitted full right arm ROCKS, Clipon/form fitted full left arm ROCKS, Clipon/form fitted full right leg ROCKS, Clipon/form fitted full left leg ROCKS, Weapon


N.A. of HeMan - Skeletor: Disc's of Doom Variant = [8 parts needing tooled]
==already tooled parts= Standard Skeletor hooded face's "skull face insert", torso, Roboto full arms; Leech Shoulder armor; Trap Jaw legs and boots; Whiplash feet;
==new part sculpts needed= Head, Torso covering body sculpt, Square head for skull insert, Head left door, Head right door, Battle Blade Skeletor Loncloth, Saw Disc Shield, Saw Disc Blade for weapon, Saw Disc blade holding weapon


M.O.T.U.- Blade = [9 parts needing tooled]
=already tooled parts= Complete He-man “except” head, forearms, and upperlegs.
=new part sculpts needed= Head, Loincloth, Right Forearm, Left Forearm, , Torso over body armor front section, Torso over body armor back section, upper Right leg weapon strap, Upper Left leg weapon strap, sword


M.O.T.U.- Rio Blast = [11 parts needing tooled]
==already tooled parts= Roboto Upper arms & Hands, Palace Guard feet, He-Man shoulders
==new part sculpts needed= Head, Wrap around amor front, Wrap around amor backpack, Torso gun with panel, Right Forearm gun clipon, Left Forearm clipon, loincloth, Upper Right leg clipon gun, Upper Left Leg clipon gun, Backpack right gun, backpack left gun


M.O.T.U.- Gwildor = [13 parts needing tooled]
==already tooled parts= Cosmic Key from Preternia He-Man
==new part sculpts needed=Head, Upper Torso, Lower Torso, Shoulders, Upper arms, Forearms, Hands, Loincloth, torso over armor coat, upper legs, lower legs, boot, feet



I will be updating this list further...

[shadowfall1976]

M.O.T.U.- Ram Man = [16 parts needing tooled]…crap.
==already tooled parts= Weapons Rack Single Axe
==new part sculpts needed= [All large Human scale] = Head, Upper Torso, Abs, Shoulders, Upper Right Arm, Upper Left Arm, Right Forearm, Left Forearm, Hand, Torso over body armor Front section, Torso over body armor back section with Belt, Loincloth, Crotch connector section, Upper Legs, Lower Legs, Boots, Feet

We get a few all new or majority new tooled figures here and there.... They need to get Ram Man done as one of the next ones though.

[Ornclown]

We get a few all new or majority new tooled figures here and there.... They need to get Ram Man done as one of the next ones though.

This!

I am really hoping we finally get Ram Man this year. He has been near the top of my list since the line began!!

[Lewd_Squirrel]

I thought Arrow only flew in toy?

[Replikor]

I thought Arrow only flew in toy?

Yes, Arrow didn't fly in the filmation toon, but the vintage toy version did have wings.

[nicholighkun]

If I were you I would count armor as one piece. The only time that front and back clip on style has been done in this line is with battle damage armor to accommidate for the plates required. That may not be a big deal, but reducing several on your list by one new part would be a bit comforting in regards to this line being, to some degree completed.

Awesome work by the way! This is pretty exciting to think about. I still haven't gone over the whole list, but I intend to. Thanks for putting the work into this, it's quite nice! : )

[Son of Keldor]

JITSU has the same armor as randor, so they only need to modify the back of it w/ the removal of the cape. then they can make Platino from Fuerza T.

=)

[Lewd_Squirrel]

Yes, Arrow didn't fly in the filmation toon, but the vintage toy version did have wings.

That's what I thought. :/ I prefer the cartoon Arrow, maybe have the toy one be a varient.

[MasterCollector]

M.O.T.U.- Ram Man = [16 parts needing tooled]…crap.
==already tooled parts= Weapons Rack Single Axe
==new part sculpts needed= [All large Human scale] = Head, Upper Torso, Abs, Shoulders, Upper Right Arm, Upper Left Arm, Right Forearm, Left Forearm, Hand, Torso over body armor Front section, Torso over body armor back section with Belt, Loincloth, Crotch connector section, Upper Legs, Lower Legs, Boots, Feet

I think it's safe to assume the upper right arm has been taken care of already with the one they used for Fisto and will no doubt use for Jitsu. That brings Ram Man down to 15 parts.

[Uki]

Nifty list-you've been busy!

I'd bet the Horsemen won't share some of the parts you suggested, but the recipes-for the most part-work pretty well.

[Skystalker]

I just hope that Dragstor gets a new chest with a spinning wheel and not just a piece of armor with a wheel molded onto it.

[Zargon]

Love this list, well done.

[Lipster]

I just hope that Dragstor gets a new chest with a spinning wheel and not just a piece of armor with a wheel molded onto it.

They could use that same chest for Buzzsaw-Hordak.

[MoViEfReAk]

After rearranging my Classics, I thought of other possibilities for Ram-Man...

They used He-Man arms on leech, so they could also use them für Ram Man, but.... take a look at Snout Spout's big boots! They could definitely be reused for Sea Hawk AND Ram Man!

[Scotward]

I'd bet the Horsemen won't share some of the parts you suggested, but the recipes-for the most part-work pretty well.

Yeah, I don't know that you could count on this for how things WILL be, but it's an interesting exercise in what MIGHT be. Cheers on all the work, Rep!

[Replikor]

List has been updated - 4/12/2012.

I revised....

M.O.T.U. - Blast Attack


I added...

FILMATION: HeMan - Batros
FILMATION: HeMan - Dree Elle
FILMATION: HeMan - Fang Man
FILMATION: HeMan - Lord Masque
FILMATION: HeMan - Shokoti
FILMATION: HeMan - StrongArm
FILMATION: HeMan - Uncle Montork
M.O.T.U. Comic's - Illumina
M.O.T.U. Comic's - Lodar
M.O.T.U. Comic's - Sleetah
M.O.T.U. Illustration - "Monogram's" Roton Model Pilot
M.O.T.U. "Variant" - Kamo Khan


I removed...

M.O.T.U. - Mosquitor - complete entry -[with him being made now]




Adding more to this list shortly....

[Chroniklor]

WOW @ that list... Great job!

[Replikor]

List has been updated - 4/17/2012.




I revised....

M.O.T.U. - Blast Attack -[figures tool count dropped]
M.O.T.U. - Mantenna = -[figures tool count dropped]
M.O.T.U. - Ram Man -[figures tool count dropped]

I added...

FILMATION: HeMan - Danavas
FILMATION: HeMan - Garn
FILMATION: HeMan - Jarvan
FILMATION: HeMan - Plundor
M.O.T.U. - 200X - Baddhra
M.O.T.U. - 200X - Tuvar
M.O.T.U. Comic's - Geldor
N.A. Of HeMan - Adam of Grayskull




Adding more to this list shortly....

[kylun flac]

I've been giving this a lot of thought lately. glad a list was made. its hard to keep track of all the characters & parts that would be used for them. thanks

[Skystalker]

Cool list, but I think you can reduce parts for Mantenna further. Can't he use Whiplash's upper legs?

[MoViEfReAk]

I don't understand the list in the first post... For example: Who wants Ram Man to have the weapons Rack axe but not Fisto's new bigger biceps? And who wants Blast Attack to have Roboto's hands? He could have Hordak's gloves instead... but not wires sticking out of his hands...

[Replikor]

I don't understand the list in the first post... For example: Who wants Ram Man to have the weapons Rack axe but not Fisto's new bigger biceps? And who wants Blast Attack to have Roboto's hands? He could have Hordak's gloves instead... but not wires sticking out of his hands...

To answer your questions...

I considered the Fisto right Bicep for Ram Mans build to begin with.

But the fact that the body would be a much larger buck/torso to begin with they would VERY probably just tool an entire body since he would still need 98% tooling anyway.
His cost cutting points would most likely be in his accessories, which is why I listed him with the Weapons Rack Axe as it "very" closely looks like his original vintage toy axe, and the tooling on him already alone would be so high they could cut a corner or two where possible to make him more feasible to produce from a cost stand point.

I listed roboto's hands as they look like the original vintage Blast Attack toys hands.
Which can be seen here in a pic from the ORG's toy images...

[JoeyCruel]

I can't find Modulok.... and I know why...

[Replikor]

I can't find Modulok.... and I know why...

Actually I did a [VERY ROUGH] guess at Modulok, Multibot and merged Megabeast tool counts.

Multibot - would net them some new adventures needed parts.
Modulok - would net them some MOTU as well as a few new adventures parts.


ALSO a HUGE factor on these two... its still unsure if they might be a single figure -that cant be disassembled- or one that can be disassembled.

Further List updates coming shortly...