Right shoulder joint defective.
He arrived in good condition.
The connection port in his body for his tail was broken.
Something else was broken (please explain).
I'm curious to know what percentage of people are getting broken tail ports on Granamyr, so I thought this would be the best way to find out. Thanks for you participation!
PS the part that is being reported to have problems is the port in the body cavity that the tail plugs into.
Last edited by nicholighkun; December 26, 2012 at 04:57pm.
Right shoulder joint defective.
Only one of anybody.
Tail port broken
Bobble head issue
After playing with him a little, I fear his arm ports might break soon.
OnlyOneSkeletor- if you look closely at the inner ring of the tail, I'll bet you'll see the ring is cracked, most likely at one of two spots where the ring is thinnest. That means you can push the tail in but that it'll fall right back out again because that ring is meant to hold the tail in place.
so i'm hopeless having a good one by trying to return mine,i'm a french resident and i remember how high was the phone bill when i had to call them about Photog lens.besides customs fees i might have to pay once more (40 euros) i guess you hear me now...i think i'll be requesting some toy repairman to solve it out (if that's possible of course) or possibly glue it,if it turns out being obsessional which i doubt.man i'm telling you,i was one of the biggest Motuc supporters,those days are gone.
Both shoulder joints on mine keep the arms on, but are loose enough that the arms pop off when I try to rotate them. Since I don't plan on moving him a whole lot, I don't plan on calling over and sending him back.
...sadly, I must report that the plug in connector for the tail on my Granamyr was indeed broken.
My Feedback Rating Thread http://www.he-man.org/forums/boards/...43#post2936643
My Ebay ratings http://feedback.ebay.com/ws/eBayISAP...k&myworld=true
My Custom MOTUC's http://www.he-man.org/forums/boards/album.php?u=36694
We need a new option for the tail port and something else being broken. My tail port is broken and my neck peg was unseated and sitting too high, resulting in a bobble head.
No problems here.
No broken tail joint, but mine does have the arm problem.
His left arm pops out when you rotate it.
Got mine today and his right shoulder will not hold the arm in. You move his arm at all and it pops out.
SUBSCRIBE OR DIE!!!: The death of a cherry picker. The continuing saga from the makers of MOTUC. The adventure begins in 2012.
UPDATE: THE CUTTING BLOCK!!!: The cherry pickers are now dead. These changes brought to you from the makers of MOTUC. The adventure begins in 2013.
Sad to see that some are having QC issues on another high priced item, but happy to say that mine is flawless. I was very careful in lining up the pegs with the shapes of the holes and pushing them straight in because I was so paranoid about breaking them; I'm sure most customers are equally as paranoid and equally as careful, so I'm not sure if I just lucked out, but I'm hoping (for Mattel's sake) that as these numbers add up, it only turns out to be a small fraction of the lot was messed up.
"I damned the world to save my daughter once... and I will do it for her again."
I do custom action figures, commissioned art, and I will make any Masters of the Universe costume, tailored to you!
View my website! http://www.havocstaff.50megs.com
The left arm on mine will fall off if you attempt to move the arm up and down. You can pop it into place and it will stay in, but any movement pops the arm out of the socket. I just have him in a meditation pose with his arms, but it is pretty sad that I can't move the left arm. The right arm is fine.
Keep The "Classicized" 200x Heads in MOTUC!
Matty Savings For the Year because of No DOS Purchases: $210
My Granamyr's left arm always pops out everytime I move it!
Psalm 18:32 - "It is God who arms me with strength and makes my way perfect."
Coming.... Glimmer & Modulok
Wanted....Entrapa, Double Trouble, Light Hope, Filmation Hordak & Clawful
Oh man, did I forget to use these [sarcasm][/sarcasm] again? Sorry....
Hey Mattel and brand management: It's the factory's responsibility to make these things correctly. If they screw up, then guess what? It's supposed to be their dollar that fixes it. If you buy it from them, then guess what? It's going to be your dollar that fixes it. Either get a new manufacturer, or tighten up on your factory QC. Unless of course it really falls back on you guys for faulty design, in which case, you should own up to your mistakes, because the Mattel way of dealing with these issues, couple with DR in general, and the QC issues themselves, are what're driving folks away from subs; most of them are not leaving because of price or any other reason. Also, if that's the case, then you may want to see to downgrading the description of your test facility from "world class" because the line they're giving their approval on is now the laughing stock of the toy world in almost every area except sculpt, and it's all due to QC issues and managements response. In other words, their screw ups are making you look bad ... very bad. And your response to their screw ups are making you look even worse. It's a sword that cuts coming and going.
PS Digital River sucks.
Last edited by nicholighkun; December 28, 2012 at 10:20am.
Is is now up and live please check it out and spread the word please!!!
Follow me on Twitter
My feedback threadhttp://www.he-man.org/forums/boards/...or-Brian-Ozone
So far mine is fine. I finally opened him up earlier tonight (I got him and the rest of my recent Matty items earlier this week, but hadn't opened any of them until earlier tonight) and I put him together. Everything is staying together fine, I can move his tail, arms, legs, etc, and nothing is falling off or seeming to be out of place. Hopefully he stays this way!
plug connector for right arm
I Am No Widget! Lurking since 02! TeelasRealDaddy, MegsTriggerman v.1 ... shame I keep getting deleted!
Megstriggerman Trader Review