Results 1 to 7 of 7

Thread: problem with the knee pivot joint

  1. #1
    Widget
    Join Date
    Nov 2013
    Posts
    4

    problem with the knee pivot joint

    I have bought a optikk action figure and when i received it the right side of the joint was out and it was to big to insert it manually. Is there anyway to put it back in.He is one of my favorite figures i have
    Last edited by gutsman234; July 10, 2014 at 08:20pm.

  2. #2
    Heroic Warrior
    Join Date
    Mar 2010
    Location
    Cutler Bay, FL
    Posts
    289
    Can you post a picture? I think I understand what your issue is, but it's better if we can see what he problem is to better assist.

  3. #3
    Widget
    Join Date
    Nov 2013
    Posts
    4
    20140710_202336[1].jpg20140710_202358[1].jpg as you can see that part is out from the socket is suppose to be in

  4. #4
    Heroic Warrior blacksun442's Avatar
    Join Date
    Jan 2012
    Location
    CT
    Posts
    208
    If its the pin for the knee heat the knee with a hair dryer until its soft then with one side against a table the other side use something thin to push the pin through
    Reply With Quote Reply With Quote Posted from Android app

  5. #5
    Heroic Warrior
    Join Date
    Mar 2010
    Location
    Cutler Bay, FL
    Posts
    289
    Use a hair dryer to heat up the rubber and you should be able to push the pin through. You should only have to heat it for about a minute.

    You can use this tutorial as a reference. It's made by Hunter Knight Customs who posts here frequently. He has many other good tutorials as well.

  6. #6
    Widget
    Join Date
    Nov 2013
    Posts
    4
    WOW that really did work! thanks guys!

  7. #7
    Heroic Warrior
    Join Date
    Mar 2010
    Location
    Cutler Bay, FL
    Posts
    289
    Glad we could help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •